banner



How To Set Up Soundproofing Foam

As a full-time remote worker, I try to make sure I take an ideal home office to be productive. I often take video calls or tape screencasts and desire to ensure I have loftier-quality audio. Getting high-quality sound recordings can be tricky. Many factors determine audio quality, such equally recording software, microphone, and where the recording is taking place. In this post, I wanted to bear witness how I used Acoustic cream to dampen and meliorate the audio of my home office.

Audio-visual foam is often used when recording audio to ameliorate quality. The room can accept just as much of an impact on audio quality as an expensive microphone. The acoustic foam helps absorb different sound frequencies and prevents the sound from reflecting or bouncing back into the microphone. Reflection is what causes an echo or hollow similar sound in the sound. Acoustic foam, nevertheless, does not soundproof the room!

Having Acoustic foam can help absorb echo when speaking into our mic. Typically for audio where you are speaking, y'all will want to identify the foam panels directly in front of y'all.

Acoustic Foam Panel Home Office

This picture is my setup in my home function. At that place are a few more panels on the wall directly backside me as well. Here are the steps I took to install them in a way that allows me to remove or adjust without damaging the wall.

Stride i - Installation Setup

To install the Acoustic foam panels, I wanted to make sure I could easily move them if needed. To do this, I needed a way to mount the cream tiles onto something lightweight and easily movable. I ended upwardly using Foamboard to attach the panels. To create this setup here is a listing of the needed supplies:

  • Acoustic Foam Tiles (minimum of 6, 12x12 inch tiles)
  • Spray Agglutinative (1 can)
  • Foam Lath (min size of 20x30 inches)
  • Sawtooth Moving-picture show Hangers (minimum one)

You besides volition demand the following tools:

  • Hammer
  • Pocket-size nails
  • Tape Measure out
  • Level

Step 2 - Align and Gum

To create a single removable panel, you will demand at least six Audio-visual foam tiles. I used the 12-inch foursquare panels with a 2-inch thick foam from SoundAssured. Anything less than 2 inches in thickness will be less constructive at absorbing the audio.

Acoustic Foam Panel Glue Poster Board

Align all six panels onto the foam board panel. The cream board volition need to be at least 20x30 inches or larger. To adhere the foam, I used a Spray Adhesive. Make sure to exercise this step in a well-ventilated area. Information technology should only take a few minutes to dry, dependent on the type of adhesive used. Once dry out, you should have something similar to this:

Acoustic Foam Panel Alignments

Step 3 - Wall Anchor/Hook

There are many ways yous can attach the foam board to a wall. I wanted to make it easy to remove or move, and so I used a standard sawtooth picture hangers. The panel is calorie-free enough that well-nigh standard wall hanging kits should be able to handle the weight.

To attach the sawtooth hanger, I used a slight corporeality of super glue on the nails to ensure a sturdy grip on the foam board.

Acoustic Foam Panel Sawtooth Hook

Step 4 - Panel Placement

The placement of the panels is crucial so they tin can be as effective as possible. For my remote dwelling house office, virtually of my audio is of me speaking. The platonic place for the panels is to place them directly in front of you behind your microphone. This placement volition help foreclose echo from being picked dorsum up from the microphone.

Acoustic Foam Panel

A unmarried panel makes up six 12x12 inch cream tiles. If you need more coverage think about the placement as well as where you may want to use the sawtooth hook.

Stride v - Attaching to Wall

To attach to the wall, you can use a standard picture frame nail to hang the panel on if a sawtooth hook is used. One time hung in the desired location, use a level to ensure it is appropriately aligned. You may need to place a secondary boom at the bottom of the console to ensure its even. A small picture nail tin can button through the cream board betwixt the cream tiles to fix to the wall.

Acoustic Foam Panel Home Office

That's it! Hopefully, this helps improve your remote office experience. Non merely should you lot accept improved audio but detect that the room volition seem a bit quieter and more comfortable to focus in. If you get panels gear up post pics in the comments below!

Source: https://coryrylan.com/blog/how-to-install-acoustic-foam

0 Response to "How To Set Up Soundproofing Foam"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel